Hakko FM-2024. Desoldering Tool 70W
Цена - по запросу
- Производитель: Hakko
- Модель: FM-2024
- Наличие: Нет в наличии
- Integrated desoldering unit equipped with nozzle with built-in heater provides excellent thermal recovery
- Nozzle can be replaced with simple one-touch operation
- Used together with an FM Series station
| Integrated heater realizes great thermal recovery. Nozzle can be replaced with simple pulling-out operation. | |
 | Choose station to suit the operation |
| Specifications vary by station combined. | |
| - Vacuum pump type desoldering tool | |
| HAKKO FM-204 Vacuum pomp type HAKKO FM-206 (3-handpiece insertion, optional soldering, SMD rework possible) | |
| - Distribution equipment for plant air or other type of compressed air is required. | |
| HAKKO FM-202 (Discontinued Products) | |
| HAKKO FM-203(2-handpiece insertion, optional soldering, SMD rework possible) | |
| Distribution equipment for plant air or other type of compressed air is required. | |
| Two power receptacles are required. | |
 | One unit can serve dual usage of Gun/Straight configurations |
 | The composite nozzle ensures superior thermal recovery |
 | Lightweight design |
 | ESD safe by design |
 Gun configuration |  Straight configuration |
 Nozzle cartridge can be replaced even before the nozzle becomes cool. | ||||
 |  |  |  |  |
| Detach the nozzle remover. | Firmly attach the nozzle remover to the nozzle cartridge as shown in the picture. | Pull the nozzle remover with the nozzle cartridge in one stroke. | ||
Packing List
 Choose HAKKO FM-2024 to suit its Applicable Station. |
| Part No. | Packing List | Applicable Station |
| No.FM2024-02 | MODEL FM-2024/24V-70W 1. MODEL FM-2024 Desoldering tool 2. Handle (for gun configuration) 3. Filter pipe assembly 4. Instruction manual | HAKKO FM-204 |
| FM2024-03 |  1. Iron holder 2. Cleaning sponge 3. Desolder control box (DCB) 4. MODEL FM-2024 Desoldering tool 5. Filter pipe assembly 6. Nozzle remover 7. Handle (for gun configuration) 8. Nozzle ø1.0 (No.N1-10) 9. Cleaning drill (for heating element) 10. Ceramic paper filter (10 pcs.) 11. Cleaning pin (for nozzle ø1.0) *12. Instruction manual *No photo for No.12 | HAKKO FM-202 (Discontinued Products) |
| FM2024-22 |  1. Iron holder No.FH200-06 (with cleaning sponge) 2. Desolder control box (DCB) 3. Cleaning drill (for heating element) 4. Filter pipe assembly 5. Ceramic paper filter (10 pcs.) 6. MODEL FM-2024 Desoldering tool 7. Handle (for gun configuration) 8. Nozzle remover 9. Connecting cable * Nozzle is not included. Purchase your required size separately | HAKKO FM-203 |
| FM2024-** |  1. Iron holder: No.FH200-05 (with HAKKO 599B tip cleaner) 2. Cleaning drill (for heating element) 3. Filter pipe assembly 4. Ceramic paper filter (10 pcs.) 5. MODEL FM-2024 Desoldering tool 6. Handle (for gun configuration) 7. Nozzle remover 8. Connecting cable * Nozzle is not included. Purchase your required size separately | HAKKO FM-206 |
Specifications
| Model No. | FM-2024 |
|---|---|
| Power consumption | 70W (24V) |
| Temperature range | 350 to 450ºC |
| Nozzle to ground resistance | <2Ω |
| Nozzle to ground potential | <2mV |
| Heating element | Composite heater |
| Cord length | 1.2m |
| Total length | 180mm (with Φ1.0mm nozzle) |
| Weight | 65g (with Φ1.0mm nozzle) |
* Total length and weight (w/o cord, hose)
-DCB (Desolder Control Box)
| Power Consumption | 12W |
| Output | 24V |
| Vacuum Generator Vacuum Pressure | Ejector type Max. 93kPa (700mmHg) |
| Suction Flow | 20L/min |
| Tip to Ground Potential | < 2mV |
| Applied Air Pressure | 490kPa (5.0kgf/cm2) When in use (trigger or button is pressed) |
| Compressed Air Consumption | 46L/min |
| Outer Dimensions | 119(W) x 45(H) x 172(D)mm |
| Weight | 1.2kg |
Replacement parts
| Part No. | Name | Specifications | |
|---|---|---|---|
 | FM2024-03 | HAKKO FM-2024 conversion kit | 70W (24V), for FM-202 (discontinued) |
 | FM2024-22 | HAKKO FM-2024 conversion kit | 70W (24V), with DCB |
 | FM2024-02 | Desoldering tool FM-2024 | 70W (24V) |
 | B2872 | Handle | for gun configuration |
 | B2876 | Nozzle remover | |
 | A1511 | Filter pipe assembly (qty 10) * Discontinued. The replacement is "A1612". | with ceramic paper filter |
 | A1612 | Filter pipe assembly (qty 10) * The replacement for A1511. | with ceramic paper filter |
 | B2873 | Cleaning drill | heating element |
 | B1087 | Cleaning pin | nozzle Φ1mm |
 | A1514 | Ceramic paper filter (qty 10) * Discontinued. The replacement is "A1613". | |
 | A1613 | Ceramic paper filter (qty 10) * The replacement for A1514. | |
 | FH100-03 | Iron holder <w/cleaning sponge> * Discontinued | |
 | B2881 | Iron holder assemly <for FM-2024> | with screw, for FH-100 (discontinued) |
 | FH200-06 | Iron holder <w/ cleaning sponge> | with power-save function |
 | B3413 | Iron holder assembly <for FM-2024> | with screw, for FH-200 with power-save function |
 | A1519 | Cleaning sponge | yellow |
 | A1536 | Cleaning sponge * Discontinued. The replacement is "A1519". | green |
 | B3253 | Connecting cable | |
 | B2300 | Heat resistant pad | |
 | B2880 | Vacuum outlet cap | with O-ring |
 | A1512 | Front holder | |
 | A1513 | Back holder bushing | |
 | B2877 | Hose | |
 | B2878 | Back holder | |
 | B2879 | Flange |
Options
| Part No. | Name | Specifications | |
|---|---|---|---|
 | 599B | HAKKO 599B tip cleaner | |
 | B2874 | Cleaning pin | nozzle Φ0.6mm |
 | B1086 | Cleaning pin | nozzle Φ0.8mm |
 | B1088 | Cleaning pin | nozzle Φ1.3mm |
 | B1089 | Cleaning pin | nozzle Φ1.6mm |
 | B2875 | Cleaning pin | nozzle Φ2mm / 2.3mm |
Maintenance
| Category | Title |
|---|---|
| How to use | Combinations of handpieces and soldering tips for the FM/FX series |
Гарантия
У нас вы можете получить онлайн-консультацию по выбору и комплектации, инструмента.
Обмен и возврат товара осуществляется в соответствии с положениями Закона о защите прав потребителей. Адрес точки приёма: 192019, г. Санкт-Петербург, ул. Смоляная, д.15, лит. А, пом. 24.
- Информация о гарантии производителя
- Найти сервисный центр по ремонту инструмента
- Сертификаты продавца/производителя
ETK-79350