iMP1 Series Artesyn 1200–1500 Watt Configurable AC-DC Power Supplies

Цена - по запросу

Производитель: Artesyn
Модель: iMP1 Series
Наличие: Нет в наличии

The iMP1 series is an AC input to DC output configurable power system consisting of a microprocessor-controlled PFC front end providing seven slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 1,500 watts and with up to 21 isolated outputs, the iMP1 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution.

Особенности

Full Medical Approval
Intelligent I2C control
Current Share on all outputs greater than 10A
Remote Sense on all outputs greater than 2A
Overload Protection on all outputs
Voltage Adjustment on all outputs (Manual or Programmable)
Margin and Remote Voltage Programming
Global DCOK and Inhibit/Enable (Logic Programmable)
Module DCOK and Inhibit (Logic Programmable)
ACOK signal
Configurable Output Sequencing
Field Replacable Intelligent Fan
Downloadable GUI
Isolated 5V @ 1A Standby Output
Active PFC
EMI Conducted and Radiated to Class B
Optional VME Timing and System DCOK/Reset Module
Optional extra hold-up module
Field Demonstrated MTBF to 550K Hours
Digital monitor of Voltage, Current and Temp (Both Input and Output)
Programmable voltage, current limit, fan speed, Foldback or Constant Current operation
Optional Extended hold-up module
External Switching Frequency Sync Input
Optional Conformal Coating
Industrial Temp Range (-40 to 70C)
Industrial Shock/Vib (>50G's)

Технические характеристики

Total Max Power:
1,500 W
Total Max Current:
300 A
Input Voltage:
85 V to 264 V
Output Voltage:
N/A
Outputs:
Size (L x W x H):
11.000" x 8.000" x 2.500"
Warranty:
2 years
Operating Temperature:
-40°C to +70°C

Electrical Specifications

Input
Output
Logic Control
Isolation
Other

Efficiency: 85% typical depending on configuration
Inrush Current: 40A Peak (Soft Start)
Frequency: 47-440 Hz
Input Range: 85-264 VAC; 120-350 VDC
Input Fuse: 25A
ACOK: >5mS early warning
Holdover Storage: 20 mSec min
Radiated EMI: CISPR 22/EN55022 Level B
Leakage Current: 300uA Max
EMI Filter: CISPR 22/EN55022 Level B
Turn-on Time: AC 2,0 sec; Inhibit 150mS
Power Factor: 0.99 typ @ full case load

Recovery Time: To within 1% in <300uSec
OCP: Programmable
OVP: Programmable
Reverse Voltage Protection: 100% of rated output
Dynamic Response: <2% or 100mV, 25% load step
Ripple: RMS 0.1%; P-P 1.0% to 20MHz
Overall Regulation: 0.4% or 20mV max
Margining: +/-4-6% of Nominal
Programming Accuracy: +/- 5%
Factory Set Point Accuracy: +/- 1%
Adjust Range: +/-10% Manual; Full Range Programmable

DCOK: +/-5% of nominal - Programmable
Single Wire Parallel: Share within 2% of total rated load
Thermal Protection: OTP/OTW Programmable
Remote Sense: Compensates up to 0.5V

Output/Output Isolation: >1 Megohm, 500V
Safety: Meets EN60950 and EN60601

Module Switching Frequency: 250kHz accepts external sync signal

Список документов товара

Гарантия

У нас вы можете получить онлайн-консультацию по выбору и комплектации, инструмента.

Обмен и возврат товара осуществляется в соответствии с положениями Закона о защите прав потребителей. Адрес точки приёма: 192019, г. Санкт-Петербург, ул. Смоляная, д.15, лит. А, пом. 24.