SIL60C2-00SADJ-VDJ Artesyn 240 Watt (60 Amp) Non-Isolated DC-DC Converters

The SIL60C2 series 60 amp non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It is available in a through-hole vertically mounting configuration with dual rows of pins. The converter accepts a wide range 4.5 to 13.8 Vdc input and provides an output that is adjustable from 0.8 to 4.0 Vdc to accommodate a wide variety of silicon power needs. Rated at 240 watts, the SIL60C2 is capable of delivering up to 60 amps; it has a typical efficiency of 89% and no minimum load requirement. Standard features include differential remote sense, remote On/Off and remote ‘power good’ indication. This converter also supports phase shedding to save power under light load conditions, and its output voltage can be adjusted to within 1% by a 2-bit VID signal.

Особенности

• 2 bit VID adjustable output voltage
• Phase shedding for power saving during light loads
• High power density design means reduced board space requirement
• Power good output signal
• Operating ambient temp up to +70°C with suitable derating and forced air cooling
• Remote ON/OFF (active high)
• 0 A minimum load
• Input under-voltage lockout
• EU directive 2002/95/EC compliant for RoHS

Технические характеристики

• Total Max Power:
  240 W
• Total Max Current:
  60 A
• Input Voltage:
  4.5 V to 13.8 V
• Output Voltage:
  0.8 V to 4 V
• Outputs:
  
• Size (L x W x H):
  1.980" x 0.780" x 0.540"
• Warranty:
  2 years
• Operating Temperature:
  0 to +70°C